1.MIX conference call can be accessed by the console application scenarios shown in (1), at the meeting site are generally equipped with speakers, microphones, PA systems and audio processing devices (such as mixers), when the need to PSTN ordinary telephone network to another venue venue proximal and distal When the conference call, you can type using the section MIX conference call audio input and output interfaces to achieve this functionality. The remote device can also be a conference call using our PSTN-based teleconference. 2.MIX conference call can be accessed mixer audio interface Description: Figure (2), from the audio interface power interface device through a dual sound channel dedicated plug audio cable (commonly known as dual-channel 6.5mm headphone plug labeled "AUDIOIN / OUT"), can lead to two monaural plugs (commonly referred to as a mono 6.5mm headphone plug). A plug labeled "AUDIO OUT" (audio output), which means that the phone distal to the proximal venue sound output from the conference site: Another plug labeled 'AUDI OIN "(audio input), which means that the sound from the proximal venue into the phone away Swiss venue. (audio input) connector and "AUDIO OUT" (audio output) plugs are unbalanced single-channel interface, audio output level <+26 dBu (15Vrms), audio input level <+26 dBu (15Vrms), which OdBu = 0.775V. 3.MIX mixer conference call can be accessed by the host computer to install the device with the power cable connected interface device and the host computer, and plug in the power supply line, this time Master opportunity first red light, also shows "HELLO INNO", when the host computer is ready, the red light goes out, then the host computer displays "READY" ready state. in the ready state, with telephone lines to telephone socket and telephone line jack power interface device connected, then dedicated audio cable end labeled "AUDIO IN / OUT" dual sound channel audio interface plug into the power interface devices: Another fork "Y" end of the two a monaural plugs, one labeled "AUDIO OUT" plug can be inserted into the audio processing equipment (eg mixers) of a road in the input channel audio jacks (commonly known as the 6.5mm audio jack mono channels), and the second . labeled "AUDIO IN" plug can be inserted into the audio processing equipment (eg mixers) of a bus in an auxiliary audio output jack can be connected consoles too would use the telephone Note: 1, audio dedicated cable installation Previously, about the sound first audio processing equipment level adjustment knob or push button minimum position. 2, the bus also called bus is the various audio channels converge onto an integrated voice channel. 3, "AUDIO IN" plug and " AUDIO OUT "plugs are unbalanced mono channel audio plug. 4, when the connected audio interface, microphone and speakers turned off by default on the host computer (except for calls ringing), and the use of the venue's microphone and speakers. 4. type mixer MIX conference call can be accessed for use by connecting the proximal and distal ordinary telephone network PSTN scene two conference meetings to exchange, to conduct regular telephone dial calls. before the call, a moderate change the venue of the microphone and speaker volume, microphone venue to hear the voices clearly prevail. connect this way audio processing equipment input channel sound level from the minimum amount of moderate tone a little bigger, easy to hear the sound of remote dial tone telephone direct dialing Call: press the "hook" button, hear a dial tone, then press the desired remote dial phone numbers, can be turned on after the incoming call ringing call: incoming call when the remote dial-up, the main control will ring, and ring flashes, then press the "hook" can be turned on after the conference call ends: To end the call, press the "hang up" button Note: Enable and disable this conference feature, you can Enable is set in the host computer's screen menu 5.MIX type mixer conference call can be accessed by setting this method of conferencing capabilities and settings off: On the host computer, press the "Menu" button on the main menu screen Press the "choice" or "select" button, select, "SETTINGS" option, press the "OK" button to enter, then select "MIX CONTROL" option, press "Enter" to enter when selecting "0N", said This meeting enabled: When you select "OFF", said the conference is off, the selected press the "Enter" key, press the "hang up" key to return to the ready state.